update : Riff Box Update new

Thảo luận trong 'RIFF' bắt đầu bởi Gsm-2016, 27/7/16.

  1. Gsm-2016

    Gsm-2016 VIP

    Tham gia ngày:
    23/7/16
    Bài viết:
    51
    Đã được thích:
    231
    Điểm thành tích:
    33
    Giới tính:
    Nam
    Hello dear RIFF Box users !

    Here You can read important instructions related to RIFF Update server, RIFF Box registration and troubleshooting.

    First few very important warnings:

    • Make sure that Your HOSTS file is not compromised by 3rd party software. Please visit this page to learn how to fix it:
      Please login or register to view links
    • DO NOT run or download any software which is not from official RIFF JTAG Box page (Please login or register to view links )
    • DO NOT post RIFF Box PCB photos, RIFF Box Serial Number or any screenshots on public forums. This is allowed ONLY in Please login or register to view links section.
    • If it's possible, always use Windows 7 to update RIFF Box firmware
    • Some islamic countries (KSA, Bahrain, Kuwait) have limited features on Internet Provider Services.
      If You live in such country, You may need to use Please login or register to view links to access update server properly.
    • Some small Internet Service Providers oftenly use Web Server on Gateway, and in such case You also may need to use Please login or register to view links, or change ISP. Lebanon is one of the countries where such problems occur for example.
    • If You use AntiVirus and Firewall software, You may need to add JTAG Manager exe to exception list.
      Remember that disabling AntiVirus won't help, it's much better to add exceptions !
      Please login or register to view links, Please login or register to view links, Please login or register to view links, Please login or register to view links, Please login or register to view links, Please login or register to view links, Please login or register to view links .


    Now, please follow below listed instructions to update Your RIFF Box Firmware and download Your license file:

    Download latest RIFF Setup file from here :Please login or register to view links , and execute it.
    Start RIFF JTAG Manager and simply follow instructions from software:
    If Your box is not registered, click "Connect Server":
    .
    [​IMG]
    .
    Enter Your desired login (user name) password and e-mail address. It's best if You have Gmail account !
    .
    [​IMG]
    .
    Confirm Your password and e-mail address:
    .
    [​IMG]
    .
    If You have done everything properly, You'll have following screen:
    .
    [​IMG]

    This means that Your box is registered ok, and license file is downloaded to Your PC. Now You can proceed to update RIFF Box Firmware.
    Click "Firmware Update" and enter login/password:
    .
    [​IMG]
    .
    New Firmware will be downloaded and Your RIFF Box will be updated.
    Take note - If You use Windows XP, You may need to re-connect USB Cable on RIFF Box, in order to finish the update properly !

    Now Your RIFF Box is registered, and You can continue using it.
     
    mthsmartphone and lamson1988 like this.
  2. toilatoi142001

    toilatoi142001 Super Mod Thành viên BQT

    Tham gia ngày:
    3/9/16
    Bài viết:
    40
    Đã được thích:
    15
    Điểm thành tích:
    8
    Giới tính:
    Nam
    RIFF JTAG Manager v1.64 and more 19.01.2017
    Hello,
    Here is list of latest RIFF Box updates:

    - RIFF JTAG Manager v1.64:
    • Fixed Password Recovery feature
      (Authorization code sending feature was broken, due to wrongly configured timeout)
    • Fixed bug which caused JTAG Manager crash after clean install and successive downloading of a DLL file while there were no PKG files installed.
    • Improved login interface - the registered email is automatically filled in to the Login field.
      (Remember that You can use both registered user name or e-mail as login. With this feature Your registered e-mail address is automatically inserted in login dialog form, so You just have to type in Your password)
    • JTAG Manager Main Window Width is increased to increase the width of Resurrector Name fields
    Please read description carefully !

    User contributed Riffpkg (Repair packs made with Package Editor) uploaded to Official RIFF Box Update Server:
    Please login or register to view links

    Special thanks goes to Please login or register to view links, Please login or register to view links, Please login or register to view linksand Please login or register to view links .
     
  3. namnhatrang

    namnhatrang TRƯỞNG HỘI ĂN NHẬU Thành viên BQT

    Tham gia ngày:
    23/7/16
    Bài viết:
    1,184
    Đã được thích:
    102
    Điểm thành tích:
    63
    Giới tính:
    Nam
    RIFF Box Updates, 06.02.2017

    Hello,
    We just uploaded following DLL-s to support storage:


    • Please login or register to view links
    RIFF JTAG – HTC ONE M8w 4G LTE Boot repair supported
    Posted on Please login or register to view links
    Repairing bricked HTC One M8Wlv (0P6B20000) via ISP connection is easy with the RIFF Box.
    Additionally to HBOOT and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘0P6B20000’.

    To resurrect HTC One M8Wlv (0P6B20000) via ISP connection:

    • Get access to HTC One M8Wlv (0P6B20000) board (PCB);
    • Check schematics picture for solder positions of CLK, DAT0, CMD and GND signals;
    • Remove (de-solder) the CLK resistor;
    • Solder CLK, DAT0, CMD and GND wires to the specified pads on the PCB;
    • Attach battery
    • Connect USB Data cable;
    • Make sure HTC One M8Wlv (0P6B20000) ISP is selected in the list of models;
    • Click Resurrect button;
    • Wait till software signals a successful operation completion;
    • Disconnect USB cable and battery, de-solder wires and solder back the CLK resistor;
    Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.

    • Please login or register to view links
    RIFF JTAG – HTC Desire Eye 4G LTE EMEA M910n Boot repair supported
    Posted on Please login or register to view links
    Repairing bricked HTC Desire M910n (0PFH11000) via ISP connection is easy with the RIFF Box.
    Additionally to HBOOT and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘0PFH11000’.

    To resurrect HTC Desire M910n (0PFH11000) via ISP connection:

    • Get access to HTC Desire M910n (0PFH11000) board (PCB);
    • Check schematics picture for solder positions of CLK, DAT0, CMD and GND signals;
    • Remove (de-solder) the CLK resistor;
    • Solder CLK, DAT0, CMD and GND wires to the specified pads on the PCB;
    • Attach battery
    • Connect USB Data cable;
    • Make sure HTC Desire M910n (0PFH11000) ISP is selected in the list of models;
    • Click Resurrect button;
    • Wait till software signals a successful operation completion;
    • Disconnect USB cable and battery, de-solder wires and solder back the CLK resistor;
    Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.

    To download and install these files, simply click "Check for updates" button in JTAG Manager, and select new files for download.
     
  4. namnhatrang

    namnhatrang TRƯỞNG HỘI ĂN NHẬU Thành viên BQT

    Tham gia ngày:
    23/7/16
    Bài viết:
    1,184
    Đã được thích:
    102
    Điểm thành tích:
    63
    Giới tính:
    Nam
    RIFF JTAG Box updates, 20.02.2017

    Today's updates:

    • Please login or register to view links
    RIFF JTAG – Samsung SM-A300F Galaxy A3 LTE Boot repair supported
    Posted on Please login or register to view links
    Repairing bricked Samsung A300F via ISP connection is easy with the RIFF Box.

    To resurrect Samsung A300F via ISP connection:

    • Get access to Samsung A300F board (PCB);
    • Check schematics picture for solder positions of CLK, DAT0, CMD and GND signals;
    • Remove (de-solder) the CLK resistor (30R);
    • Solder CLK, DAT0, CMD and GND wires to the specified pads on the PCB;
    • Attach battery
    • Connect USB Data cable (in some cases also attach battery);
    • Make sure Samsung A300F ISP is selected in the list of models;
    • Click Resurrect button;
    • Wait till software signals a successful operation completion;
    • Disconnect USB cable and battery, de-solder wires and solder back the CLK resistor;
    Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.

    • Please login or register to view links
    RIFF JTAG – Samsung SM-A500F Galaxy A5 LTE Boot repair supported
    Posted on Please login or register to view links
    Repairing bricked Samsung A500F via ISP connection is easy with the RIFF Box.

    To resurrect Samsung A500F via ISP connection:

    • Get access to Samsung A500F board (PCB);
    • Check schematics picture for solder positions of CLK, DAT0, CMD and GND signals;
    • Remove (de-solder) the CLK resistor (30R);
    • Solder CLK, DAT0, CMD and GND wires to the specified pads on the PCB;
    • Attach battery
    • Connect USB Data cable (in some cases also attach battery);
    • Make sure Samsung A500F ISP is selected in the list of models;
    • Click Resurrect button;
    • Wait till software signals a successful operation completion;
    • Disconnect USB cable and battery, de-solder wires and solder back the CLK resistor;
    Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.

    • Please login or register to view links
    RIFF JTAG – HTC One M8 ULCA (AT&T) Boot repair supported
    Posted on Please login or register to view links
    Repairing bricked HTC One M8Ulca (0P6B12000) via ISP connection is easy with the RIFF Box.
    Additionally to HBOOT and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘0P6B12000’.

    To resurrect HTC One M8Ulca (0P6B12000) via ISP connection:

    • Get access to HTC One M8Ulca (0P6B12000) board (PCB);
    • Check schematics picture for solder positions of CLK, DAT0, CMD and GND signals;
    • Remove (de-solder) the CLK resistor;
    • Solder CLK, DAT0, CMD and GND wires to the specified pads on the PCB;
    • Attach battery
    • Connect USB Data cable;
    • Make sure HTC One M8Ulca (0P6B12000) ISP is selected in the list of models;
    • Click Resurrect button;
    • Wait till software signals a successful operation completion;
    • Disconnect USB cable and battery, de-solder wires and solder back the CLK resistor;
    Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.

    To download these files click "Check for Updates" button in "Box Service" TAB.
     
    MT Mobile thích bài này.
  5. namnhatrang

    namnhatrang TRƯỞNG HỘI ĂN NHẬU Thành viên BQT

    Tham gia ngày:
    23/7/16
    Bài viết:
    1,184
    Đã được thích:
    102
    Điểm thành tích:
    63
    Giới tính:
    Nam
    RIFF JTAG Manager v1.66, RIFF II Firmware v1.42 (10x faster)

    Hello,
    Please read this carefully if You are RIFF Box v2 user:

    RIFF JTAG Manager 1.66
    ---------------------------
    - RIFFBOX2 support for new connection mode is added (for new Drivers)
    - Due to new drivers Read/Write speeds via eMMC interface increased 10 times and more
    - Read/Write speed is now shown in MB/s
    - Firmware Update process adjusted for slow networks (Indonesia, Bangladesh, India . . .)


    RIFF Box Firmware v1.42

    ---------------------------
    - RIFFBOX connection mode is optimized for better speed, it is no more the CDC.
    The data transfer speeds are increased more than 10 times.
    - Fixed bug in handling the erroneous situations during eMMC data read operations.


    RIFF Box v2 users:

    1. Download new files from server (JTAG Manager and "New Drivers")
    2. Click "Firmware Update" and wait for process to be finished,
    (Update port driver remains old ! ! !)
    3. Install new drivers from "New Driver" folder in JTAG Manager install dir.

    New driver, together with new firmware will dramatically increase performances with eMMC chips and SD cards.
    Theoretical speed is up to 18MB/s using 4bit bus width.
    In practice it can depend on eMMC chip model but even for oldest chips it's near 10MB/s.

    [​IMG]


    RIFF Box v1 users don't need to install new driver, as it cannot be implemented for old hardware for now.
    __________________
     
  6. namnhatrang

    namnhatrang TRƯỞNG HỘI ĂN NHẬU Thành viên BQT

    Tham gia ngày:
    23/7/16
    Bài viết:
    1,184
    Đã được thích:
    102
    Điểm thành tích:
    63
    Giới tính:
    Nam
    RIFF JTAG Manager v1.67, RIFF Box Firmware v1.43

    JTAG Manager 1.67
    ---------------------------
    - Fixed bug (which is related to RIFFBOX2 only), which caused box connection error, after this operation: "Setting new JTAG/eMMC License to the RIFFBOX."

    RIFF Box Firmware v1.43
    ---------------------------
    - Fixed bug related to RIFF Box v1 eMMC detection
    - Fixed bug related to RIFF Box v2 USB 2.0 ports enumeration

    New RIFF Box v2 drivers:
    ----------------------------- Drivers from year 2014 (x86 and x64)


    Instructions for users with V2 box and "Device cannot start, error code 10" problem:

    Method 1:
    - Disconnect RIFF Box v2 from USB port
    - Open box housing and take PCB out
    - Connect TP1 to TP2 using tweezers,
    - Connect USB cable to Box and PC
    - Disconnect TP-s
    - Launch JTAG Manager (any version from 1.65 and up)
    - Perform Firmware Update as requested

    After You connect TP-s and USB cable, box will enumerate in bootloader mode. RIFF Update Port driver is required (like allways during firmware update) and Recovery firmware will be flashed.
    After this, normal Firmware Update procedure will follow and You can use RIFF Box on any USB port (2.0 or 3.0).

    Method 2:
    - Find working USB 3.0 port (By working means that LPCDevice driver works)
    - Update box to V1.43 firmware
     
  7. namnhatrang

    namnhatrang TRƯỞNG HỘI ĂN NHẬU Thành viên BQT

    Tham gia ngày:
    23/7/16
    Bài viết:
    1,184
    Đã được thích:
    102
    Điểm thành tích:
    63
    Giới tính:
    Nam
    RIFF Box Firmware v1.45, RIFF JTAG Manager v1.69 eMMC Plugin v3.02 released

    Firmware 1.45
    ---------------------------
    - Added MassStorage Mode for RIFFBOX2



    JTAG Manager 1.69

    ---------------------------
    - Fixed the bug for General Purpose Partition Sizes
    - Added feature to switch ON/OFF the MassStorage Mode. For this, please connect an eMMC (either via Direct or ISP interface),
    make sure it is detected (on the "eMMC/SD Card" page), and on the 'eMMC/SD Advanced' dialog click the 'MassStorage Mode ON/OFF' button to setup which partitions are to be mounted.
    Please note, for stable connection, first of all do reads on the "eMMC/SD Card" page to adjust stable Frequency, BusWidth and Voltage.
    After you click "MassStorage Mode ON/OFF" button, current settings for Voltage, Frequencty, BusWidth will be written into RIFFBOX non-volatile memory,
    and while the MassStorage mode is ON, upon each connection to USB the RIFFBOX will additinally to normal Control interface enumarate the MassStorage Disks (as if a FlashStick is connected to PC)

    eMMC Partition Table FullFlash Image Files Processing Plugin
    (eMMCDiskPartitions.dll) v3.02
    -------------------------------------
    - Added support for User Area Partition bounds selection from the JTAG Manager's MassStorage settings dialog
    - Added file system detection: the plugin analyzes the partition's data structure to autodetect what file system (if any) is used. The result is displayed in the new "F/S" row
    ..

    To mount EXT/x partitions You should install EXT FS driver from here:

    Please login or register to view links
     
  8. namnhatrang

    namnhatrang TRƯỞNG HỘI ĂN NHẬU Thành viên BQT

    Tham gia ngày:
    23/7/16
    Bài viết:
    1,184
    Đã được thích:
    102
    Điểm thành tích:
    63
    Giới tính:
    Nam
    RIFF JTAG Manager v1.73, RIFF Firmware v1.47 – Mass storage mode support for RIFF Box

    RIFF Firmware 1.47
    —————————
    – MassStorage Mount/Dismount support for RIFFBOX1 is added.
    – Working with special eMMC vendor features (like dedicated Samsung eMMC Chip’s commands) is re-organized.
    Due to high risk of erasing User/Boot areas on the eMMC chips which are not Samsung, the Samsung chips autodetection is completely removed.
    To access special Samsung eMMC’s features (like firmware update, factory reset, etc) User must manually select Vendor Mode.
    – RIFF1 & RIFF2: Finally!!! The eMMC/SD Erase Operation (for Direct/ISP connection) finally is implemented!!!
    RIFF JTAG Manager 1.73
    —————————
    – MassStorage mount/dismount feature is reworked and improved. Now is possible to Mount/Reconfigure/Dismount the MassStorage via the same dialog.
    The MassStorage settings are read from the RIFFBOX, so it is much more convenient in case users need to mount/dismount same eMMC Area ocasianlly or to adjust eMMC connection parameters for better stability.
    – MassStorage Mount/Dismount support for RIFFBOX1 is added.
    – Working with special eMMC vendor features (like dedicated Samsung eMMC Chip’s commands) is re-organized (see the Firmware 1.47 notes)
    – Finally!!! The eMMC/SD Erase Operation (for Direct/ISP connection) is implemented!!!
    Please login or register to view links

    JTAG Manager 1.72
    —————————
    – New method of resurrectors grouping is added.
    Setting ISP Resurrectors shows only the ISP available DLLs; Setting ISP Resurrectors shows only the packages (PKG files); setting JTAG Resurrectors shows only the JTAG available DLLs
    Setting ALL Resurrectors shows all available DLLs same as is done in JTAG Manager 1.71 and lower.
    – Fixed bug for correct setting of the recommended SD/MMC VCCIO voltage for ISP DLLs: when model is selected, the JTAG Manager adjusts the frequency, voltage and other settings to match (if possible) those values, which are hardcoded into resurrector DLL.
    Please login or register to view links
    List of newest repair DLL-s with ISP support:
    – LG F240L,
    – Asus ZenFone2 (ZE551ML),
    – Huawei Honor 4C (CHM-U01) ISP
    – Nokia lumia 530 ISP
    – Samsung I9305 ISP
    – Samsung J105H ISP
    – Samsung N8000 ISP
    – Samsung P5100 ISP
    – Samsung T531 ISP
    – Samsung G361H ISP
    – Samsung I9300 ISP
    – Samsung I9300I ISP
    – Samsung I9301I ISP
    – Samsung i9070 ISP
    – Samsung i8552 ISP
    – Samsung n7000 ISP
    – Samsung i9192 ISP
    – Samsung i9060 ISP
    – Samsung G318H ISP
    – HTC Flyer ISP
    – HTC Desire 326G ISP
    – ZTE V811 ISP
     
  9. namnhatrang

    namnhatrang TRƯỞNG HỘI ĂN NHẬU Thành viên BQT

    Tham gia ngày:
    23/7/16
    Bài viết:
    1,184
    Đã được thích:
    102
    Điểm thành tích:
    63
    Giới tính:
    Nam
    15.09.2017 RIFF Box updates - Xiaomi REDMi 4A !

    Hello,
    Newly released ISP DLL-s:

    - Samsung A310F
    - Samsung I9190
    - Samsung J320H
    - Samsung P3100
    - Samsung T989
    - Xiaomi Redmi 4A

    Please click "Check for Updates" button to download newest set of repair DLL-s.
     
  10. namnhatrang

    namnhatrang TRƯỞNG HỘI ĂN NHẬU Thành viên BQT

    Tham gia ngày:
    23/7/16
    Bài viết:
    1,184
    Đã được thích:
    102
    Điểm thành tích:
    63
    Giới tính:
    Nam
    22.09.2017 RIFF Box updates - more ISP models support

    Hello,
    Following DLL-s are uploaded to support area:
    • Acer Liquid Z330
    • HTC OneM7 (PN0710000)
    • Lenovo K910
    • Samsung A500K
    • Samsung J510FN
    • Samsung N7100
    • Sony C1605
    • ZTE_V880E

    To download and install newly released updates, start RIFF JTAG Manager, go to Box Service TAB and click "Check for Updates" button.
     
  11. namnhatrang

    namnhatrang TRƯỞNG HỘI ĂN NHẬU Thành viên BQT

    Tham gia ngày:
    23/7/16
    Bài viết:
    1,184
    Đã được thích:
    102
    Điểm thành tích:
    63
    Giới tính:
    Nam
    RIFF JTAG Manager v1.74, RIFF Box Firmware v1.48 Turbo Mode for RIFF Box v1

    Hello dear RIFF Box users !

    We're proud to announce newest updates for RIFF Box v1 and RIFF BOX v2:

    RIFF Box Firmware v1.48
    ---------------------------
    - New SD/MMC Interface is added for RIFF1: the CPLD is used for data shifting at max 8MHz rate.
    As the eMMC signals the TDI, TMS, RTCX, and TDO signals on JTAG Connector are used. Read/Write speeds at 8MHz are aprroximately 800KB/sec - read, 365KB/s - write.

    Since the new SD/MMC Interface shares the JTAG port connector, in the JTAG Manager in the SD/MMC Interface list, it is named as 'JTAG';
    - The eMMC Read/Write speeds for GPIO (RJ-45) SD/MMC Interface are increased: 260KB/s - read, 360 KB/s - write (compare with Firmware 1.47: ~198 KB/s - read, 190 KB/s - write)
    - The eMMC Read speeds for RIFF2 (30PN) SD/MMC Interface are increased: at SD/MMC Clock Speed = 34MHz: ~9.50MB/s - read (compare with Firmware 1.47: ~7.80 MB/s - read)
    - The eMMC Write speeds for RIFF2 (30PN) SD/MMC Interface are increased more than 20x(!!!) times: at SD/MMC Clock Speed = 34MHz: 6.40MB/s - write (compare with Firmware 1.47: ~390 KB/s - write)


    RIFF JTAG Manager v1.74
    ---------------------------
    - ExtCSD Register's fields 177, 179 and 162 (BOOT_BUS_CONDITIONS, PARTITION_CONFIG, and RST_n_FUNCTION) are now displayed in eMMC connection info ("Check eMMC/SD Card" button or eMMC Advanced Actions Dialog's "Read Info from eMMC")
    - Added selection of SD/MMC H/W Interface: currently are available:
    > 1. RIFF1 SD/MMC Interface @RJ45 Connector
    > 2. RIFF1 SD/MMC Interface @JTAG Connector
    > 3. RIFF2 SD/MMC Interface @30-Pin Connector
    - Added real-time RIFFBOX status (in StatusBar): the BOX revision (RIFFBOX1/RIFFBOX2) and Firmware version
    - Improved switching on-the-fly of the JTAG Manager's specific to RIFFBOX revision parameters, immediately when the new box is connected to PC while JTAG Manager is running.
    - Schematics picture is updated (RIFF JTAG Pinout button on the Resurrection page). Schematics picture is now displayed depending on the box revision - RIFFBOX1 or RIFFBOX2.
    - Fixed buffer overrun bug in RIFF2 firmware, which caused getting chaotically corrupted data during the eMMC Read operations
    - Added one-time Start Trial Period feature for RIFF v1 users


    RIFF Remote Helper v1.10
    ----------------------------
    - Added support for RIFF v2 hardware
    - Added support for new drivers
    - Remote Helper is now included with setup package by default.


    You can download new files from RIFF Box home page:

    Please login or register to view links


    - RIFF Box v1 SD/eMMC interface via JTAG port (CPLD):


    In order to maximize read/write speed on v1 hardware, we decided to update CPLD firmware and use 20 pin port to connect SD/eMMC to RIFF Box.
    Please note that RJ45 port remains functional, too.


    - One Time Trial for v1 users:

    For those users with expired accounts, who want to test new features for free, we added optional function. Upon connecting to RIFF Box license server, You'll be prompted to activate Trial Period (15 days) which will enable Your box with all current updates and functions.

    - Support activations are permanent from now.

    All users who activate their account will get "Forever" status (Including those who activated support in last 3 months). This means that there will be no more account expiration.
     

Users Who Have Read This Thread (Total: 1)